|
1: Estación de vertido
2: Ciclón separador
3: Colector de polvo
4: Unidades de aspiración
|
|
|
1/ Dump Station
The dump station (1) introduces soiled bedding into the transportation line gradually to ensure the correct flow is maintained. Transportation air is also used as dust extraction to collect airborne dust and allergens. An optional hood fitting over the unit directs the air path away from the operator to minimise allergen exposure. For operator safety interlocked covers protect operators from moving parts. All parts in stainless steel.
|
|
2/ Cyclone Separator.
Soiled bedding is separated in the cyclone separator. It is discharged from the vacuum line through a rotary valve. |
|
Soiled Bedding Container.
Soiled bedding container filled by compactor or by a secondary fan to ensure maximum filled capacity.
Various models to suit the size and operational needs of the facility. |
|
Vacuum Piping
Vacuum piping is all in stainless steel. Pipes are connected together with clamp couplings. The pipe profile is always designed to give each system the very best performance. Dimensions depend on specific designs for each given system. |
|
Circuito de aspiración.
Circuito de aspiración totalmente construido en acero inoxidable. Las tuberías están conectadas entre si con clamps. El perfil de tubo se diseña en todos los casos con el fin de ofrecer el máximo rendimiento. Las dimensiones dependerán del diseño específico de cada sistema. |
|
3/ Dust Collector
Dust collector into which the dust that forms during the operation is separated, with integral collection bin.
Vacuum units (4) are used for transportation on both the soiled and clean sides of the system. There is always a separate unit for each side to prevent any risk of cross contamination. Vacuum units are matched to the unique pipe design of each system to give all systems optional performance.
Vacuum units are placed in sound absorbing boxes and can have HEPA and charcoal filters if necessary. |
|
|
|
|
|
Products 