|
The purpose of the EFFLUENTS TREATMENT SYSTEM is to perform heat sterilization at 134ºC of all the potentially contaminated effluents generated by the centre, under conditions that are safe for both the operator and the environment.
The system consists of one or several digesters that sterilize collected effluents. These effluents will then be cooled and poured into drains in sterile conditions.
All the circuits involved in the treatment system are also automatically sterilized each time a hazardous treatment is carried out.
Notes:
For the system to work correctly, the following supplies are required:
- S team.
- Compressed air (a redundant double compressor is recommended).
- Decalcified water.
 |
|
|
Treatment Capacity of 50 Litres Per Process.
Effluents treatment system, comprising: - Digester with chamber, with capacity to treat 50 litres per sterilization process.
- With auto-cleaning circuit at the end of the sterilization process
- Effluent cooled before being poured into drains
- Accumulator with total volume of 1200 litres, suitable for disinfection using steam sterilization cycle
- Control system with Siemens PLC, touchscreen and process chart recorder |
|
Treatment Capacity of 400 Litres Per Process.
Effluents treatment system, comprising: - Digester with chamber, with capacity to treat 400 litres per sterilization process.
- With auto-cleaning circuit at the end of the sterilization process
- Effluent cooled before being poured into drains
- Accumulator with total volume of 1500 litres, suitable for disinfection using steam sterilization cycle
- Control system with Siemens PLC, touchscreen and process chart recorder.
|
|
Treatment Capacity of 800 Litres Per Process.
Effluents treatment system, comprising: - Two digesters with jacket, with capacity to treat 800 litres per sterilization process (working in parallel)
- With auto-cleaning circuit at the end of the sterilization process
- Effluent cooled before being poured into drains
- Accumulator with total volume of 1500 litres, suitable for disinfection using steam sterilization cycle
- Control system with Siemens industrial PLC, touchscreen and process chart recorder. |
|
|
|
|
<< Start < Prev 1 2 Next > End >>
|
|
Page 1 of 2 |
Products 